AVL is one of those automotive engineering companies that is much larger and more important than its name recognition outside the industry would suggest.

Headquartered in Graz, Austria, AVL works across vehicle engineering, simulation, testing, electrification, powertrain development, batteries, ADAS and automated driving, software-defined vehicles, calibration and validation. The company says it employs more than 12,000 people at more than 90 locations worldwide.

For automotive engineers evaluating software, however, there is one complication:

AVL is not really one software product.

AVL automotive engineering software for simulation, EV development, testing and vehicle validation

It is a broad engineering ecosystem combining simulation software, test systems, data analysis, calibration tools, engineering services and physical test equipment.

That makes AVL particularly relevant to automakers, suppliers and engineering organizations trying to connect virtual vehicle development with physical testing.

What Does AVL Software Do?

AVL’s software portfolio stretches across much of the vehicle-development process.

Depending on the product, engineers can use AVL software to:

  • Model complete vehicles and powertrains
  • Simulate electric, hybrid, fuel-cell and combustion propulsion systems
  • Perform CFD and thermal simulation
  • Develop and evaluate battery systems
  • Model vehicle dynamics
  • Create virtual driving and ADAS scenarios
  • Perform Software-in-the-Loop testing
  • Connect simulation with Hardware-in-the-Loop and physical test environments
  • Calibrate vehicle control systems
  • Analyze test and measurement data
  • Automate verification and validation workflows

AVL describes its simulation portfolio as supporting virtualization of vehicle functions across different vehicle types and development stages.

That breadth is one reason AVL can be difficult to categorize.

It belongs under Simulation, certainly.

It also belongs under Verification & Test.

And for automotive engineering, it increasingly belongs in the discussion around software-defined vehicle development.

Major AVL Automotive Software Products

AVL has a large product portfolio, but several products are particularly relevant when evaluating automotive engineering software.

AVL CRUISE M

AVL CRUISE M is a multidisciplinary system-simulation platform used for vehicle and powertrain development.

Engineers can use it to model energy flows and interactions between components and subsystems, including electric, hybrid and conventional vehicle architectures.

AVL positions CRUISE M for concept analysis, subsystem design, system layout and virtual component integration.

For EV development, that can mean examining how components such as the battery, inverter, electric motor, thermal systems and vehicle loads influence one another before the physical vehicle exists.

The 2026 R1 release continued expanding CRUISE M’s multiphysical system-simulation capabilities, including tools for visualizing energy states and flows within complex systems.

AVL FIRE M

AVL FIRE M is AVL’s 3D CFD simulation environment.

Automotive applications include:

  • Vehicle aerodynamics
  • Battery thermal management
  • Battery thermal runaway
  • E-motor cooling
  • HVAC and passenger comfort
  • Underhood thermal management
  • Combustion
  • Fuel injection
  • Exhaust and aftertreatment
  • Fuel cells

AVL says FIRE M combines fluid flow, heat transfer, multiphase flow, combustion and reactive-process simulation within one environment.

For electric vehicles in particular, the battery capabilities are worth noting. FIRE M can model heat generation and dissipation at cell, module and pack level as well as coolant flow and thermal-runaway propagation.

AVL VSM

AVL VSM focuses on complete-vehicle simulation.

Engineers can create vehicle models using configurable templates rather than building every vehicle model entirely from scratch.

That makes VSM relevant for vehicle-dynamics work, controls development and system-level analysis where engineers need a functioning virtual representation of the complete vehicle.

AVL SiL Suite

This may be one of the most interesting AVL products as vehicles become increasingly software-defined.

AVL SiL Suite provides an environment for Software-in-the-Loop simulation, testing and calibration.

Engineers can design and run vehicle test scenarios on standard desktop computers or in cloud environments before the associated ECU hardware is available. The same testing approach can then be carried into SiL, HiL, physical testbeds and vehicles.

That matters because software-defined vehicles require substantially more software testing than traditional vehicle programs.

Instead of waiting until hardware arrives to discover whether a control function works properly, engineers can begin testing much earlier.

For engineers trying to understand the distinction between these development methods, see:

Automotive MIL vs. SIL vs. HIL: How Engineers Test a Car Before the Car Exists

AVL CAMEO

AVL CAMEO 5 is used for verification, validation, test sequencing, Design of Experiments and optimization.

AVL currently offers applications aimed at:

  • E-drives
  • Batteries
  • Fuel cells
  • Hybrid systems

The software is designed to automate testing and help engineers optimize systems using fewer physical test iterations.

As automotive systems become more software-dependent, tools such as CAMEO can also help organizations repeatedly verify combinations of software and vehicle hardware before deployment.

AVL CRETA

AVL CRETA 6 is a calibration data lifecycle management system.

Modern vehicles may contain enormous numbers of parameters governing ECUs and control functions. Those calibration values must remain traceable across models, variants and software releases.

CRETA is designed to manage that calibration data and integrate it into an automotive development toolchain. AVL specifically connects the product with the growing complexity created by electrification, ADAS and software-defined vehicles.

AVL CONCERTO

AVL CONCERTO 6 is an engineering data-analysis and reporting environment.

It can be used to process, compare and visualize simulation and measurement data, including data generated through vehicle and powertrain testing.

This is an important piece of the AVL proposition.

AVL does not simply simulate vehicles.

The company also makes physical test equipment.

Software such as CONCERTO helps connect the resulting mountains of test data back into the engineering process.

AVL and Electric-Vehicle Development

AVL’s roots are deeply connected with powertrain engineering, but the company is no longer simply an engine-development company.

Its current portfolio encompasses battery-electric vehicles, hybrid systems, fuel cells, electric motors, inverters and charging-related development.

AVL operates a Battery Innovation Center at its headquarters in Graz and develops engineering and testing systems spanning battery cells through complete electric drivetrains.

For an EV development program, AVL tools can therefore participate in several different engineering questions:

How large should the battery be?

How will the battery behave thermally?

How should the cooling system be designed?

How efficient is the electric drivetrain?

How will control software behave under different driving conditions?

Can the software be tested before the production ECU exists?

Do the simulation results agree with measurements from the physical vehicle?

That ability to move between virtual and physical development is a major part of AVL’s appeal.

AVL and Software-Defined Vehicles

AVL is also becoming increasingly relevant to software-defined vehicle development.

That does not mean AVL replaces a vehicle operating system or the software architecture being developed by companies such as Rivian, Volkswagen, Tesla or traditional automotive suppliers.

Instead, AVL sits heavily on the development, simulation and validation side of the SDV problem.

Software-defined vehicles create a testing challenge.

If vehicle functions can change through software updates, verification and validation cannot end when the vehicle leaves the factory.

Automakers need repeatable ways to test:

  • New software versions
  • Vehicle variants
  • ECU interactions
  • Driving scenarios
  • Hardware/software combinations
  • Safety-critical functions
  • Continuous software releases

AVL explicitly promotes development methods incorporating DevOps, automated testing and continuous verification and validation for software-defined vehicles.

That puts products such as SiL Suite, CAMEO, CRETA and AVL’s broader testing infrastructure directly into the SDV discussion.

See also:

What Is a Software-Defined Vehicle—and Why Is It Changing Automotive Engineering?

AVL for ADAS and Automated Driving

AVL also offers simulation and testing technology for advanced driver-assistance and automated-driving systems.

AVL Scenario Designer, for example, lets engineers build traffic scenarios using road data in the ASAM OpenDRIVE format. Scenarios can include vehicles, bicycles, pedestrians, environmental conditions and driving actions.

AVL’s broader ADAS portfolio includes scenario simulation, sensor simulation, data analysis and physical testing.

The objective is familiar:

Test dangerous, rare or complicated driving situations virtually before attempting them repeatedly with physical vehicles.

That can dramatically expand the number of conditions engineers can evaluate without requiring fleets of prototypes.

Does AVL Offer a Free Trial?

Yes — for some AVL software.

And AVL deserves some credit here.

The company operates the AVL Experience Cloud, where a number of software products currently include a “Try for Free” option.

AVL says that depending on the product, selecting Try for Free may provide a downloadable demo license or another form of evaluation access.

Current examples displaying free-evaluation options include:

  • AVL VSM
  • AVL SiL Suite
  • AVL CAMEO 5
  • AVL CONCERTO 6
  • AVL CRETA
  • AVL SCENIUS
  • AVL SIMcloud

That does not mean every AVL simulation or testing product can simply be downloaded and evaluated anonymously.

Products tied closely to specialized test hardware, engineering services or enterprise development environments may require direct contact with AVL.

But compared with automotive engineering vendors that provide virtually no visible evaluation path at all, AVL makes a meaningful portion of its software portfolio surprisingly approachable.

What Should You Evaluate During an AVL Trial?

Do not evaluate AVL software solely by whether you can reproduce a polished example model.

A useful trial should involve one of your own engineering problems.

For system simulation, evaluate:

  • How quickly existing vehicle parameters can be imported
  • Availability of appropriate component models
  • Battery and powertrain model fidelity
  • Solver performance
  • Model reuse
  • Parameter studies
  • Integration with MATLAB/Simulink or other existing tools
  • Co-simulation capabilities

For SiL and testing software, evaluate:

  • Test-case reuse between SiL and HiL
  • Integration with existing ECUs and models
  • Automation
  • CI/CD compatibility
  • Supported ASAM standards
  • Cloud execution
  • Traceability
  • Reporting
  • Ability to reproduce physical test conditions virtually

For CFD, evaluate:

  • CAD preparation
  • Meshing workflow
  • Battery and thermal models
  • Solver speed
  • HPC scalability
  • Post-processing
  • Correlation against existing physical test data

And across all AVL products, ask the question that becomes increasingly important as automotive software stacks grow:

How easily does this tool work with software we already own?

A technically excellent simulation tool can still be the wrong choice if using it requires rebuilding an established engineering process around it.

Who Should Consider AVL?

AVL is particularly worth evaluating for:

  • Automotive OEMs
  • Tier 1 suppliers
  • EV startups
  • Battery developers
  • Powertrain engineering teams
  • Controls and calibration engineers
  • ADAS and automated-driving teams
  • Automotive test organizations
  • Engineering consultants
  • Universities and research organizations
  • Companies trying to connect simulation with physical validation

Smaller organizations should evaluate carefully which portion of the AVL ecosystem they actually need.

AVL’s strength is breadth.

But breadth can also introduce complexity.

An engineering team needing straightforward CFD, for example, should compare FIRE M with alternatives such as Ansys Fluent, Simcenter STAR-CCM+, Altair AcuSolve or cloud-native simulation platforms.

A team focused primarily on controls may want to compare AVL’s workflow with MathWorks, dSPACE, Vector and related automotive development environments.

The EngineeringSoftwareTrials Verdict

AVL deserves a place near the top of any serious automotive engineering software list.

Not because every automotive engineer needs AVL software.

Many do not.

But AVL occupies an unusually important position between simulation and reality.

A company such as Ansys may be thought of primarily as a simulation company.

A company such as Vector may be thought of primarily around vehicle networks and embedded software.

MathWorks is deeply associated with modeling and controls.

dSPACE is closely associated with real-time testing and HIL.

AVL overlaps several of those worlds while also building the physical test systems used to validate actual vehicles and components.

That creates an interesting engineering proposition:

Model the vehicle. Simulate the system. Test the software. Run the physical test. Compare the data. Calibrate the system. Repeat.

For automotive organizations trying to reduce prototypes and move more development upstream into simulation, that connection between the virtual and physical worlds may matter as much as the individual capabilities of any single AVL software package.

Trial Availability

Free trial/evaluation available: Yes, for multiple AVL software products through the AVL Experience Cloud.

Trial type: Varies by product.

Best fit: Automotive simulation, electrification, powertrain development, SiL/HiL workflows, calibration, testing, ADAS and vehicle validation.

Official website: AVL

EST recommendation: Worth evaluating for automotive programs where simulation, testing and validation must function as one connected development process.