Siemens Electronic Design Automation
Siemens EDA provides a wide range of electronic design automation tools used to design printed circuit boards, integrated circuits, and complex electronic systems.
Many of these tools were originally developed by Mentor Graphics, which Siemens acquired in 2017 to expand its semiconductor and electronics design software portfolio.
Today, Siemens EDA solutions support engineering teams working in:
• semiconductor chip design
• PCB layout and verification
• electronic systems development
• manufacturing analysis
Siemens offers a mix of cloud-based trials and guided evaluations, allowing engineers to explore real workflows used in modern electronics development.
What Makes Siemens EDA Different?
Unlike many software vendors that offer a single product, Siemens EDA provides a full ecosystem of tools covering the entire electronics development lifecycle.
From PCB layout to chip verification, Siemens tools are often used in:
• aerospace and defense systems
• automotive electronics
• telecommunications infrastructure
• semiconductor design
Because of this breadth, Siemens trials may appear in different formats depending on the product.
Siemens EDA Software Trial Programs
The Siemens EDA trial portal provides access to cloud-hosted design environments that allow engineers to explore semiconductor and electronics design workflows.
These trials are designed to provide hands-on experience with real engineering tools used in industry.
Benefits of the Siemens trial environment include:
• no local installation required
• browser-based access
• guided engineering workflows
• hands-on exercises
Engineers can begin exploring these tools within minutes.
Siemens EDA Tools
Siemens PADS Professional (PCB Design)
Siemens PADS is Siemens’ PCB design platform built for individual engineers and small-to-mid-sized teams.
It provides a complete environment for:
• schematic capture
• PCB layout and routing
• signal integrity and thermal analysis
• 3D board visualization
• ECAD-MCAD collaboration
Unlike some Siemens tools, PADS is typically evaluated through a 30-day guided trial, which may include setup support from Siemens.
Valor NPI
Valor NPI focuses on design for manufacturability (DFM) analysis for printed circuit boards.
The tool helps engineers identify potential manufacturing issues early in the design process and generate reports that improve production readiness.
Valor tools are widely used in electronics manufacturing environments. Start your 30 day Valor NPI Trial
HyperLynx
HyperLynx is a simulation and analysis platform used to verify PCB performance before manufacturing.
Engineers use HyperLynx to analyze:
• signal integrity
• power distribution
• electromagnetic compatibility
These simulations help identify electrical problems early in the design process.
Capital E/E Systems Development
Capital is Siemens’ platform for designing complex electrical and electronic systems used in industries such as automotive and aerospace.
The platform supports development of:
• wiring architectures
• network communication systems
• embedded software
Capital helps engineering teams manage increasingly complex electrical architectures in modern products
Why Engineers Explore Siemens EDA Trials
EDA software can be difficult to evaluate because many tools require complex installation and licensing environments.
Siemens provides cloud-based trial environments that allow engineers to explore design workflows through virtual laboratories without installing large software toolchains locally.
These trials allow engineers to experience how Siemens EDA tools support modern electronics development.
Siemens EDA and the Semiconductor Industry
Siemens EDA tools are widely used across the semiconductor industry for chip design, verification, and system integration.
Engineering teams designing advanced semiconductors rely on EDA tools to simulate and verify complex integrated circuits containing billions of transistors before fabrication.
Companies around the world continue to deploy Siemens EDA software to accelerate semiconductor innovation and improve design reliability.
Explore Siemens EDA Trials
If you’re interested in exploring modern electronics design workflows, the Siemens EDA trial portal provides hands-on access to several design and verification tools
Advanced IC package design trial > Try Now
- Fastest path to implement large, complex packages and interposers.
- Advanced support for 2.5D/3D heterogeneous designs
- Minimizes substrate re-spins and material scrap cost with tape-out ready metal fill
- Productivity, capacity and performance for ultra-high pin count designs
Valor NPI for any EDA flow trial > TryNow
- Use Valor NPI with the ODB++ product model and Valor Parts Library
- Run DFM analyses using the Analysis Definition Manager (ADM)
- Produce a report on Manufacturing Risk Analysis (MRA)
- Design fabrication and assembly panels
- Control how the panel is structured and optimize the panel utilization
Z-planner Enterprise trial > Try Now
- Comprehensive dielectric materials library
- Use HyperLynx field solver with advanced copper roughness modeling
- Qualify materials
- Map properties based on Dk, Df, Tg, Td & thermal expansion
- PCB stackup calculator
- Fully licensed software with sample files
Xpedition Package Designer trial > Try Now
- Tool capacity and performance on large designs
- Comprehensive plane shape/area fill capabilities
- Throughput and efficiency
- Consistent generation of high-quality manufacturing output (GDS)
Calibre 3DSTACK trial > Try Now
- Innovator3D IC (i3D) constructs a 3D virtual model of multi-substrate package designs
- Creation and management of a system-level netlist
- Calibre 3DSTACK performs physical verification on your multi-die package
- Check connectivity and critical Design Rule Check (DRC) violation
PCBflow cloud DFM trial > Try Now
- Printed circuit board (PCB) manufacturability feedback before handoff
- PCBflow optimizes the PCB design and manufacturing process
- Consolidate all essential resources on a unified and secure cloud platform.
- Utilize design for manufacturing (DFM)
- Upload designs in various CAD formats
- Identify assembly issues early
PartQuest Portal Standard trial > Try Now
The PartQuest Portal Standard subscription provides searchable access to high-quality ECAD models for Xpedition and PADS Professional for over 600M manufacturer part numbers. You simply drag and drop these models into your schematic.
Siemens PADS >Try Now
- PCB design and analysis: Everything you need to design your simplest to most complex designs
- Supply chain resilience: Access to real-time component sourcing data
- Cloud-enabled collaboration: Transforms how electronics design data is managed, shared and visualized
- Part research and creation: Easily find the symbol, IPC-compliant footprint and 3D model for the components you need
- ECAD/MCAD co-design: The PCB and the mechanical engineer stay in sync, improving on data exchange standards
- PCB manufacturing: Integrated Design for Manufacture (DFM) analysis
Why Siemens EDA Trials Are Different
Many EDA tools are traditionally difficult to evaluate due to:
- complex installation requirements
- licensing constraints
- specialized workflows
Siemens addresses this by offering:
• browser-based trial environments
• guided engineering labs
• structured evaluation workflows
This allows engineers to explore advanced tools without setting up full local environments.
Where Siemens Fits in the EDA Landscape
Siemens is one of the major players in electronic design automation, alongside:
- Synopsys
- Cadence Design Systems
Together, these companies provide many of the tools used to design modern electronics and semiconductor systems.
How Siemens EDA Compares to PCB Tools Like Altium and KiCad
While tools like:
- Altium Designer
- KiCad
focus primarily on PCB design, Siemens EDA spans a broader range of engineering workflows including:
• PCB design (PADS, Xpedition)
• simulation and analysis (HyperLynx)
• manufacturing validation (Valor)
• system-level electrical design (Capital)
• semiconductor design and verification
This makes Siemens EDA particularly relevant for organizations working on complex, multi-domain electronic systems.
Who Should Explore Siemens EDA Trials?
Siemens EDA trials are ideal for:
• PCB designers evaluating mid-to-advanced tools
• engineers working on complex electronic systems
• hardware teams exploring simulation and verification workflows
• students interested in semiconductor and electronics design
Because the tools vary in complexity, Siemens trials are often best suited for engineers looking to move beyond entry-level platforms.
